2003 TOSCA TS-RP 31 (M)

Sandstrahlmaschine für Bleche und Träger, kontinuierliches Tunnelsystem, automatischer Zyklus. Die Handhabung des Materials erfolgt mittels einer horizontalen Sandstrahloberfläche, die mit einer Steuereinheit mit Geschwindigkeit Variator ausgestattet ist, Die Geschwindigkeit der zu behandelnden Teile wird dann entsprechend dem Ausgangszustand der zu behandelnden Oberflächen und dem erforderlichen Grad gewählt

Arbeitsstunden:1631

Roller blasting m/c, TOSCA brand/mod.: TS/RP 31

Roller machine for sheets and beams, continuous tunnel system, automatic cycle. 

The handling of the material takes place by means of a horizontal roller surface equipped with a control unit with speed variator, 

the speed of pieces under treatment is then chosen according to the initial state of the surfaces to be treated and the degree of required

finishing

Equipped with:

- no.: 08 FILTER FC 32

- useful width.......................mm.   1.000/3.000

- useful height......................mm.      800

- TURBINES

  The arrangement and number of turbines, assembled both above and below the sliding surface of the material, allow perfect cleaning

   in a single pass of all the surfaces to be pickled in a single pass. 

TECHNICAL FEATURES 

- Useful dimensions............................mm 3000 x 800 

- Equipped with FC 32 cartridge type suction filter 

- Roller conveyors with total recovery of

  grit..................................................m.     12 (IN) / 12 (OUT) 

- Speed projection..............................m/sec 80 

- no.: 08  turbine, with the possibility of

              inclination............................kW     15 each

- no.: 01 Aspirator...............................kW     22 

- no.: 01 Screen auger.........................kW      4 

- no.: 01 Cross auger...........................kW.     4 

- no.: 01 Longitudinal auger.................kW.     5,5 

- no.: 02 External input recovery auger.kW      2,2 each 

- no.: 02 External recovery screw.........kW.      2,2 each   

- no.: 01 Elevator................................KW       7,5 

- no.: 01 Blower..................................kW.     22 

- no.: 01 Lifting brush group................kW.      4 

- no.: 01 Brush recovery screw.............kW.      2,2 

- no.: 01 Brush....................................kW      3 

- no.: 02 Brush stone actuator..............kW.      0,24 each 

- no.: 01 Roller control reducer.............kW.      4.8